Upgrading your 2020 MINI Countryman with Everyday MINI LED Interior Ambient Lighting is a fantastic way to enhance your driving experience. This simple customization not only adds a modern touch to your vehicle’s interior but also improves visibility and ambiance during nighttime drives.

What You’ll Need

  • Everyday MINI LED Ambient Lighting Kit
  • Trim removal tools
  • Phillips screwdriver
  • Double-sided tape (usually included)
  • Zip ties

Step-by-Step Installation Guide

Follow these steps to install your new LED ambient lighting quickly and safely:

  1. Prepare the Interior: Turn off your vehicle and disconnect the battery to ensure safety during installation.
  2. Remove Trim Panels: Use trim removal tools to carefully remove the door panels or other areas where the LED strips will be installed without damaging clips or surfaces.
  3. Position the LED Strips: Test fit the LED strips to your desired locations inside the cabin, typically around footwells, door pockets, and dashboard edges.
  4. Secure the LEDs: Attach the LED strips using the provided double-sided tape and secure loose wiring with zip ties to prevent rattling.
  5. Connect to Power: Connect the wiring harness to a power source, such as the fuse box or an auxiliary power outlet, following the kit’s instructions.
  6. Test the Lighting: Reconnect the battery and turn on your MINI to ensure the lights illuminate correctly and adjust brightness if applicable.
  7. Reassemble: Carefully reinstall all removed trim panels, making sure everything fits snugly.

By following these steps, you’ll enjoy a sleek, personalized ambiance in your 2020 MINI Countryman that enhances every drive.